Add your first aircraft

Steps

1. Open Hangar and tap the + button at the top, or tap Add first aircraft.
2. Type a name you'll recognize, such as Sport Trainer 40.
3. Choose the type, then the power, such as Electric or Glow (nitro).
4. Fill in what you know, such as wingspan and flying weight. You can leave the rest empty.
5. Tap Save. The aircraft appears in your hangar.
6. Tap the aircraft to open its page. From there you can measure the wing, set up its checklist and add photos.

Good to know

• To change details later, open the aircraft and tap Edit.
• To delete an aircraft, open it, tap Edit, then tap Delete aircraft at the bottom.
• On the Bench screen, choose the aircraft under Save measurements to, so readings are saved to it.

Related guides

• Find your way aroundMaiden has five sections. Here's what each one is for.
• Read your model's manualMaiden reads a PDF manual for the model's details, its recommended CG and its recommended throws.
• Measure a wing from a photoPhotograph the wing with a sheet of paper on it, and Maiden works out its size and where the CG goes.
• Set up a model's checklistStart from a standard checklist, then add, reword and reorder steps for this model.